● The mould should be cleaned before using STRIPER C01. Core making after
brushing and drying. Brushing once can be used time and again. Don't shake
the plastic bottles before using STRIPER C01. Mixing slightly by a small stick,
if settled down. Tighten the cover after use.
● The mould should be cleaned before using STRIPER H02. Be sprayed directly
without dilution. The mould temperature should be ≥120℃. Spraying once
can be used repeatedly. If STRIPER H02 is demixing slightly, just stir it up,
you can continue to use it.
